Verifying the Sender’s Address in the Email Activity Setting in uProduce (1G only)

XES provides the means to safeguard reputation of your emails and enhance deliverability. XES requires that before you send emails, you must verify each email address that you will use as a "From" or "Sender" address to prove that you own it.

The following explains how to verify the From email addresses in the Email Activity setting in uProduce.

To verify sender’s email address (1G):

1.     Open or create a new Email Activity in uProduce.

2.     In the Message Header section, enter an email address in the From Email field, and click Verify.

 The entire email address is case sensitive. For example, if you verify support@ABC.com, you cannot send emails from Support@abc.com unless you verify Support@abc.com also.

An email is now sent from Amazon SES to the owner of this address, asking for confirmation on the ownership of this email address.

3.     Make sure to inform your contact persons at the company that they will receive an email from Amazon SES, which includes a verification link that they must click within 24 hours.

The following is an example of an address verification email received from Amazon:

Once verified (the link is clicked), the following webpage appears:

You can now use XMPie Email Service (XES) to send emails from this address.

 If you have emails/triggered emails that use ADORs as the sender address, for example a Refer a Friend email, this will not be supported since the values of these ADORs have not been verified. Do one of the following:

–       If all the From email addresses are expected to be from the same domain, verify the entire domain. In this case, all emails (arriving via the ADOR) will automatically be considered as verified.

–       Use a verified static address (such as noreply@yourdomain.com) in the From field, and enter a personalized display name using an ADOR in the From Name field. For example, in case of a Refer a Friend flow, use an ADOR for the referrer's name in the From Name field.

–       If you want to enable replies to personalized addresses that have not been verified, use the verified static address in the From field and use the unverified personalized address (arriving via the ADOR) in the Reply To field. This requires an upgrade to PersonalEffect version 9.0.2 and above.