Global Configurations Table

uStore comes with a set of preconfigured global configurations which apply to the entire system.

Some of these configurations may be changed. Since any changes that you make apply to the entire system, they must be done with caution.

Global configurations can be viewed in the following location:

     Presets > System Setup > Global Configurations

To edit a global configuration:

1.      Click the Edit icon of the required configuration.

The following is an example of the DefaultDisplayQueueID configuration window.

The window contains the following fields:

   Name: Name of the Global Configuration. It is recommended not to change this name.

   Description: Description of the Global Configuration.

   Value: Selected value for this configuration.

   Application Type: Defines whether the Global Configuration applies to the Back Office application (AdminApp) or to the Storefront (CustomApp). It is recommended not to change this value.

2.       Edit the Value field and click Save.

The following table lists all global configurations in the system.

Name

Description

Default Value

validationKey

Unique server key for the Storefront.

 This value is set during installation and should not be changed.

 

decryptionKey

Key used for encryption and decryption of forms, authentication of cookie data and view-state data, and for verification of out-of-process session state identification.

 This value is set during installation and should not be changed.

 

validationKey

Unique server key for the Back Office.

 This value is set during installation and should not be changed.

 

decryptionKey

Key used for encryption and decryption of forms, authentication of cookie data and view-state data, and for verification of out-of-process session state identification.

 This value is set during installation and should not be changed.

 

SessionStateMode

Used by the installer in order to set the Session State mode.
Possible values are InProc and SQLServer.

InProc

TaxRoundingMethod

Determines how tax prices are rounded up.
Possible values are Ceiling, Floor and Round.

Round

MarketingProductsGroups

Marketing product group IDs (comma separated) used by the Cost Center plug-in.

 

AccessibilityFriendly

Determines whether the Storefront is in Accessibility Friendly mode. Accessibility Friendly mode affects validation messages, grid paging and date and time pickers, making them look and behave differently.

False

DefaultDisplayQueueID

Determines which queue is displayed by default when a Back Office user enters the Orders tab. The value can be any Queue ID.

1

ProductDownloadExpirationDays

Expiration period for output download.

Enter the number of days after which the product download option in the Storefront expires. Leaving this field empty means there is no expiration period for product download. Entering a zero value will make the product expire immediately.

 

MinimumAllowedDPI

Determines the minimum allowed DPI for images contained in documents uploaded in the Document Builder.
A warning message is displayed to the customer if an uploaded image has a DPI lower than the entered value.

Leaving this field empty or a value of 0 means there is no minimum DPI.

150

DefaultCompositeQuantity

When placing an order for a Composite Product, the Total Price displayed in the Storefront is based on the default number of copies. The DefaultCompositeQuantity parameter enables changing this default value.

Enter the default value for the quantity of Composite items that can be ordered. When set to Null, the smallest amount defined by the price steps of the product will be used.
The Quantity can be changed in the store when finalizing an order.

 

FileSubmissionGetViewNumberOfTrials

Determines the number of times the client (browser) tries to retrieve information from the server in the Document Builder display (Document Submission).

30

StagingEnvironment

Sign this uStore installation as a staging environment. For further details, refer to the uStore Installation Guide.

False

ThumbnailPreviewFullSizeByDefault

Mark this configuration as true in order to show the thumbnail preview in full size in a popup instead of a fixed size.

False

UeditControlWidth

Determines the width of the uEdit application within uStore (Flash version only).

920

UeditControlHeight

Determines the height of the uEdit application within uStore (Flash version only).

540

SingleSignOnTimeout

The period of time, in minutes, after which the given single sign on URL expires.

60

P3PHeader

P3P is the Platform for Privacy Preferences. The value describes a compact policy with tokens such as CAO PSA OUR.

 

TouchPointNameFormat

Format of Touch Point names created by uStore for email products (1G only).
Use {0} for Item ID, {1} for Encrypted Order ID, {2} for sequential Order ID, {3} for Store ID, {4} for Customer ID.

Example:

uStore_{1}_{0}

ShowCurrencyCode

Determines whether to show the currency abbreviation (for example USD, EUR, CHF) next to the price.

True

UproduceOutputFileNameFormat

Format of uProduce output file name.
Use {0} for document name, {1} for Encrypted Order ID, {2} for Item ID, {3} for sequential Order ID, {4} for Product ID, {5} for Store ID, {6} for the Customer ID.

Example:

{0}_O_{1}_{2}

UproduceOutputFileNameFormatForGroup

Format of uProduce output file name for groups of aggregated items.
Use {0} for document name, {1} for Group ID, {2} for Group Name.

Example:

{0}_AggregationGroup{1}

DeploymentMode

Used by uStore Update Application to determine whether uStore is deployed in a cluster.
Possible values are SingleServer or Cluster.

SingleServer

AssetUploadLimit

Determines the maximum allowed size (in MB) for images uploaded in the Customization and uEdit pages.

15

ThumbnailCreationTimeout

Determines the timeout (in seconds) for creating thumbnails in the Document Builder display (Document Submission).

300

HighQualityImages

Determines whether to use high quality images in the Document Builder display (Document Submission). Setting the value to True may impact performance.

False

EnableOptimizations

Determines whether to enable JavaScript and CSS bundling and minification.

True

MaxDrafts

The maximum number of draft orders that will be displayed in the Last Draft Orders section.

3

ProofSetTimeout

Determines the timeout (in seconds) for generating a proof set when calculating number of copies per recipient according to a value defined in the process job.

60

AllowBrowserAutoComplete

In the Storefront, determines whether the browser's auto complete feature is used. It can be set to False in order to enhance security.

True

OrderQueue_PageSize

Determines the number of orders shown on each page of the order queues. Can be set to a maximum of 500 orders per page.

50

UserEmailValidation_RegEx

Regular expressions used to validate user email addresses.

^([\w\!\#$&,:;()\%\'\*\+\-\/\=\?\^\`{\|\}\~]+\.)*[\w\!\#$&,:;()\%\'\*\+\-\/\=\?\^\`{\|\}\~]+@((((([a-zA-Z0-9]{1}[a-zA-Z0-9\-]{0,62}[a-zA-Z0-9]{1})|[a-zA-Z])\.)+[a-zA-Z]{1,6})|(\d{1,3}\.){3}\d{1,3}(\:\d{1,5})?)$

MerchantIconMaxWidth

The maximum width allowed for a merchant logo icon.

450

MerchantIconMaxHeight

The maximum height allowed for a merchant logo icon.

80

UEditReadyFontTimeout

The timeout (in milliseconds) for loading fonts in uEdit or in the rich text editor.

10000

ProductionDateFormat

The date format used in recipient lists.

M/d/yyyy

FileAttachmentDefaultExtensions

Default extensions used when creating a new file attachment property.

PDF, PPT, PPTX, DOC, DOCX, EPS, EPSF, JPG, JPEG

RefreshPreviewTimeout

The timeout (in seconds) for waiting for a proof job to complete on the Customization page.

25

ExcelProvider

For internal use only.

 This value is set during installation and should not be changed.

SmartXls

PrepressInProgressTimeoutMinutes

The timeout (in minutes) for keeping an item in the "Prepress In Progress" queue before moving it to the "Failed Jobs" queue. To ignore the timeout and leave the item in the "Prepress In Progress" queue, enter "0".

60

FedEx_Currency_MXN

Use FedEx_Currency_XXX, where XXX is an ISO 4217 currency code, in order to map it to the currency code expected by FedEx.

NMP

FedEx_Currency_GBP

Use FedEx_Currency_XXX, where XXX is an ISO 4217 currency code, in order to map it to the currency code expected by FedEx.

UKL

FedEx_Currency_CHF

Use FedEx_Currency_XXX, where XXX is an ISO 4217 currency code, in order to map it to the currency code expected by FedEx.

SFR

CsvDelimiter

Defines the delimiter which is used to separate fields in Text CSV files. Note: for the Tab delimiter write "TAB", for other delimiters use the delimiter character.

,

CachedXlimFilesKeepHours

Defines the expiry period, in hours, for keeping cached proof results of XLIM documents in uStore's file system.

24

XMCampaignAnalyticsCacheDuration

Defines the expiry period, in hours, for keeping cached Cross Media Analytic reports.

When a Storefront user requests to view the analytics of a XM campaign in the Order History page, if this period expired, updated reports will be re-generated.

24

XMInstanceIDDraftCashDurationDraft

The duration, in minutes, during which the instance ID is cached for draft orders.

20

AnonymousUsersKeepDays

The duration, in days, for keeping anonymous users which were created when anonymous users entered a B2C store.

30

RemoveDeletedUsers

Determines whether the garbage collector removes data of deleted users from the database and file system.

False

AlwaysGenerateProof

Determines whether a proof is automatically produced for each ordered item. If the value is False and "Let the customer generate a proof" is unchecked, a proof will not be generated

True

ResizeImageInSlideShow

Determines whether to resize the images which are displayed by the slide show control used in the Customization and Product Details pages.

True

AdminPasswordPolicy

The Back Office login password policy, written using regular expression.

Important! If you change the policy, you must change the validation message accordingly in Presets > Localization > {language} > Admin Resources > Admin_Password_Policy.

(?=.{9,})(?=.*?[^\w\s])(?=.*?[0-9])(?=.*?[A-Z]).*?[a-z].*


GdprConfirmationEnabled

If set to True, the "Show GDPR confirmation checkbox in Storefront" option in the Store Setup Advanced tab is selected by default for each new store.

When the checkbox is selected, shoppers must verify that the recipient list(s) used in their orders are GDPR compliant, i.e. recipient lists are free from data subjects who asked to be deleted or didn't consent to being included in the specific operation.

False


GdprCleanupEnabled

If set to true, "Turn on automatic deletion of personal information" checkbox in the Store Setup Advanced tab is selected by default for each new store.

When the checkbox is selected, a daily deletion mechanism of recipient lists and instances is carried out. Recipient lists, outputs, instances etc. that were created over 30 days ago in the Back office or Storefront are automatically deleted.

False


GdprRLExpirationDays_Storefront

Period in days from upload or creation of the recipient list until it is automatically deleted from the Storefront.

30 days


GdprRLExpirationDays_Backoffice

Period in days from arrival of the order to the Backoffice until the recipient list/XM Campaign instance is automatically deleted.

30 days


GdprRLExpirationNotificationDays

Define the number of days before the recipient list/XM Campaign instance expires in the Backoffice to be displayed in the order list.

7 days

TaxForShippingMethod

Define the way tax is applied to the shipping price when shipping products of different tax groups.

When selecting "Proportional", calculation of the shipping tax takes into account the different tax rates of products within a shipment. For example, if the shipment contains both exempt and taxable products, the portion of the shipping charge allocated to the taxable products is taxable, while the shipping price portion attributed to the exempt products is exempt.

Set to "Max" to select the highest tax rate of all product tax groups and apply it to the total shipping price.

Proportional